|
|
Standard
Stock Ferrite Ring Magnets
Grade
5 - anisotropic,
must be magnetized through thickness.
Grade
1 - isotropic, may be magnetized through any dimension, weaker
than the anisotropic types.
Ferrite
Grade 5 Ring Magnets
Other sizes
are available on request, or can be machined from stock sizes. These rings
are oriented through the thickness.
Sorted in
ascending order of Outside Diameter, Inside Diameter, and then Thickness.
|
|
|
Ferrite Grade 5 Ring Magnets
|
| Item
Number |
Outside
Diameter |
Inside
Diameter |
Thickness |
|
Item
Number |
Outside
Diameter |
Inside
Diameter |
Thickness |
| 63B0552220 |
0.550 |
0.225 |
0.200 |
|
F639 |
2.362 |
0.945 |
0.276 |
| 63B06929118 |
0.690 |
0.290 |
0.118 |
|
63B23710028 |
2.370 |
1.000 |
0.275 |
| 63BX1150250D |
1.180 |
0.500 |
0.250 |
|
63B23710037 |
2.375 |
1.000 |
0.375 |
| 63B12526233 |
1.250 |
0.262 |
0.330 |
|
63B24010028 |
2.400 |
1.000 |
0.280 |
| 63B1253719 |
1.250 |
0.375 |
0.188 |
|
63B2412393 |
2.400 |
1.270 |
0.393 |
| 63B1554250 |
1.500 |
0.540 |
0.250 |
|
63B2711325 |
2.790 |
1.190 |
0.330 |
| 63B1785155 |
1.760 |
0.855 |
0.155 |
|
63B3312850 |
3.340 |
1.280 |
0.850 |
| 63B1787225 |
1.770 |
0.870 |
0.225 |
|
63B3312425 |
3.370 |
1.280 |
0.425 |
| 63B20866394 |
2.000 |
0.866 |
0.394 |
|
63B4517400 |
4.500 |
1.750 |
0.400 |
| 63B2180270 |
2.100 |
0.800 |
0.270 |
|
63B7542750 |
7.500 |
4.250 |
0.750 |
| 63B2312276 |
2.360 |
1.260 |
0.276 |
|
63B8643866 |
8.660 |
4.330 |
0.866 |
| Tolerances
are the greater of +2% or +0.005" of the diameters,
and +0.005"on thickness. |
|
|
|
Ferrite
Grade 1 Ring Magnets
Other
sizes are available on request, or can be machined from stock sizes.
Grade 1 rings are isotropic and may be magnetized in any direction.
Sorted
in ascending order of Outside Diameter, Inside Diameter, and then
Thickness.
|
Ferrite Grade 1 Ring Magnets |
| Item
Number |
Outside
Diameter |
Inside
Diameter |
Thickness |
| 63A500925 |
0.500 |
0.093 |
0.250 |
| 63A752725 |
0.750 |
0.260 |
0.250 |
| F403 |
1.079 |
0.597 |
0.250 |
| 63A1095025 |
1.125 |
0.500 |
0.250 |
| Tolerances
are the greater of +2% or +0.015" of the diameters,
and +0.005" on thickness. |
|
|
|
